technical information

Torque Specifications for HANS Device Fasteners

Helmet Anchors

Post Anchor and Post Collar

Torque specs for the indexing post or screw are: 30 Inch Pounds (in-lbs) OR

3.4 Newton Meters (N-m) which is similar to: Finger tight plus one quarter turn additional.


Quick Click Anchor

Torque specs for the QC screw are: 30 Inch Pounds (in-lbs) OR

3.4 Newton Meters (N-m) which is similar to: Finger tight plus one quarter turn additional.


Tether Clamps

Fixed Tether Carriers

Torque specs for the screws holding the metal fixed tether clamps are:

20 Inch Pounds (in-lbs) OR 2.25 Newton Meters (N-m)which is similar to: Very tight.


Sliding Tether Carriers

Torque specs for the screws holding the orange sliding tether carriers are:

8.0 Inch Pounds (in-lbs) OR 0.9 Newton Meters (Nm) which is similar to: Finger tight.

Quick Start Guide

English

Quick Start Guide

Spanish

Quick Start Guide

Chinese

HANS Performance Products, 328 FM 306, New Braunfels, TX 78130      Customer Service 800-654-7223

Copyright © 2016 HANS Performance Products

home          tech         recertify          press          faq          video